US Tower Corporation

US Tower Corporation

Manufacturer of the World's Finest,
State of the Art,
Telescoping Towers

1099 W. Ropes Ave ~ Woodlake, CA 93286
Phone: (559) 564-6000 ~ Fax: (559) 564-6011

Our TX series of medium duty towers are available in several different models:

The TX-438 has a maximum extended height of 38' without mast and a minimum nested height of 21' 6." This tower consists of 2 sections, the top one being 12 1/2" and the bottom one being 15." For rotor information, the inside diameter of the top section is 7 1/8." This tower weighs 355 lbs. It comes standard with a hand winch, hinged base, anchor bolts (3/4" x 27" long) and a rotor plate (approx. down 4' inside the tower).
The average wind load ratings for the TX-438 are as follows:

70 MPH Winds -- 14.75 sq. feet; 200 lbs.
50 MPH Winds -- 35 sq feet; 300 lbs.

To see the diagram for the foundation for this tower, please click here.

The TX-438 retails for $2,209.00

We do have several accessories that can be used with this tower:

CX-2 Coax Arms
IV-16 Inverted Vee
TRX-80 Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
MD-75 Motor Drive
MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast

The TX-455 has a maximum height of 55' without mast and a minimum nested height of 21' 6." This tower consists of 3 sections, the top one being 12 1/2" and the bottom section is 18." The inside diameter for your rotor is 7 1/8" in the top section. This tower weighs 670 lbs. It comes standard with a hand winch, hinged base, anchor bolts (1" x 27" long) and a rotor plate (approx. down 4' inside the tower).

The average wind load ratings for the TX-455 are as follows:

70 MPH Winds -- 12.3 sq. feet; 200 lbs.
50 MPH Winds -- 37 sq feet; 300 lbs.

To see the diagram for the foundation for this tower, please click here.

The TX-455 retails for $3,054.00

There are several accessories that can be used with this tower:

CX-3 Coax Arms
IV-16 Inverted Vee
TRX-80 Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
MD-75 Motor Drive
MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast

The TX-472 has a maximum height of 72' without mast and a minimum nested height of 22' 8." This tower consists of 4 sections, the top one being 12 1/2" and the bottom section is 21 5/8." The inside diameter for your rotor is 7 1/8" in the top section. This tower weighs 1040 lbs. It comes standard with a hand winch, hinged base, anchor bolts (1 1/8" x 27" long) and a rotor plate (approx. down 4' inside the tower).

The average wind load ratings for the TX-472 are as follows:

70 MPH Winds -- 10.3 sq. feet; 200 lbs.
50 MPH Winds -- 35 sq feet; 350 lbs.

To see the diagram for the foundation for this tower, please click here.

The TX-472 retails for $5,019.00

These accessories can be used with the TX-472:

CX-4 Coax Arms
IV-16 Inverted Vee
TRX-80HD Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
MD-75 Motor Drive
There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast
CM-20 -- 20 ft. Cromolly Mast

The TX-472 is also available in a package with the MDP-750 as the TX-472MDP.

*Note: The TX-472MDP does require the purchase of either the MCL-100 Limit Switch Control or the RMC-1000 Remote Control.

The TX-472MDP can also be paired with the above listed accessories.

The TX-472MDP retails for $8,076.00

The TX-489MDPL has a maximum height of 89' without mast and a minimum nested height of 23' 4." This tower consists of 5 sections, the top one being 12 1/2" and the bottom section is 25 5/8." The inside diameter for your rotor is 7 1/8" in the top section. This tower weighs 1800 lbs. It comes standard with the MDPL-1000 motor drive (this one is the deluxe motor drive with our exclusive Level Wind feature), hinged base, anchor bolts (1" x 27" long) and a rotor plate (approx. down 4' inside the tower).

*Note: This tower requires the purchase of either the MCL-100 Limit Switch Control or the RMC-1000 Remote Control.

The average wind load ratings for the TX-489MDPL are as follows:

70 MPH Winds -- 7.2 sq. feet; 150 lbs.
50 MPH Winds -- 32 sq feet; 250 lbs.

To see the diagram for the foundation for this tower, please click here.

The TX-489MDPL retails for $13,095.00

These accessories can be used with the TX-489MDPL:

CX-5 Coax Arms
IV-16 Inverted Vee
TRX-80HD Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast
CM-20 -- 20 ft. Cromolly Mast