The TMM-433SS has a maximum height of 33' without mast and a minimum nested height of 11' 4." This tower consists of 4 sections, the top one being 10" and the bottom one being 18." For rotor information, the inside diameter of the top section is 5 9/16." This tower weighs 315 lbs. It comes standard with a hand winch, hinged base, anchor bolts (1" x 27" long), a rotor plate (approx. down 4' inside the tower) and an 8' mast.

The average wind load ratings for the TMM-433SS are as follows:

70 MPH Winds -- 8 sq. feet; 75 lbs.
50 MPH Winds -- 20 sq feet; 150 lbs.

To see the diagram for the foundation for this tower, please click here.

We do have several accessories that can be used with this tower:

CX-4 Coax Arms

IV-16 Inverted Vee

TRX-80 Raising Fixture

MRF Mast Raising Fixture

MD-75 Motor Drive

MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used if you prefer something other than the standard M-8:

M-5 -- 5 ft. Mast

M-10 -- 10 ft. Mast

M-15 -- 15 ft. Mast

M-15R -- 15 ft. Reinforced Mast

The TMM-433HD is a heavy duty version of the TMM-433SS. It has the same minimum and maximum heights with 4 sections. The sections are bigger, though. The top section is 12 1/2" and the bottom section is 21 1/2", giving an inside diameter for your rotor of 7 1/8" in the top section. This tower weighs 400 lbs. It also comes standard with a hand winch, hinged base, anchor bolts (1 1/8" x 27" long), a rotor plate (approx. down 4' inside the tower) and an 8' mast.

The average wind load ratings for the TMM-433HD are as follows:

70 MPH Winds -- 21 sq. feet; 150 lbs.
50 MPH Winds -- 51 sq feet; 250 lbs.

To see the diagram for the foundation for this tower, please click here.

The same accessory list applies to this tower, as well:

CX-4 Coax Arms

IV-16 Inverted Vee

TRX-80 Raising Fixture

MRF Mast Raising Fixture

MD-75 Motor Drive

MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used if you prefer something other than the standard M-8:

M-5 -- 5 ft. Mast

M-10 -- 10 ft. Mast

M-15 -- 15 ft. Mast

M-15R -- 15 ft. Reinforced Mast

The TMM-541SS has a maximum height of 41' without mast and a minimum nested height of 12.' This tower consists of 5 sections, the top one being 10" and the bottom one being 21 5/8." For rotor information, the inside diameter of the top section is 5 9/16." This tower weighs 430 lbs. It comes standard with a hand winch, hinged base, anchor bolts (1 1/8" x 27" long), a rotor plate (approx. down 4' inside the tower) and an 8' mast.

The average wind load ratings for the TMM-541SS are as follows:

70 MPH Winds -- 12 sq. feet; 50 lbs.
50 MPH Winds -- 35 sq feet; 150 lbs.

To see the diagram for the foundation for this tower, please click here.

These accessories can be used with the TMM-541SS:

CX-5 Coax Arms

IV-16 Inverted Vee

TRX-80 Raising Fixture

MRF Mast Raising Fixture

MD-75 Motor Drive

MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used if you prefer something other than the standard M-8:

M-5 -- 5 ft. Mast

M-10 -- 10 ft. Mast

M-15 -- 15 ft. Mast

M-15R -- 15 ft. Reinforced Mast

Back

This website, all graphics, photos and contents © US Tower Corp. 2002-2008