US Tower Corporation

Manufacturer of the World's Finest,
State of the Art,
Telescoping Towers

1099 W. Ropes Ave ~ Woodlake, CA 93286
Phone: (559) 564-6000 ~ Fax: (559) 564-6011

Our HDX series heavy duty towers are available in several different models:

The HDX-538 has a maximum height of 38' without mast and a minimum nested height of 21' 6." This tower consists of 2 sections, the top one being 15" and the bottom one being 18." For rotor information, the inside diameter of the top section is 8 1/4." This tower weighs 600 lbs. It comes standard with a hand winch, hinged base, anchor bolts (1" x 27" long) and a rotor plate (approx. down 4' inside the tower).
The average wind load ratings for the HDX-538 are as follows:

70 MPH Winds -- 33.7 sq. feet; 250 lbs.
50 MPH Winds -- 45 sq feet; 350 lbs.

To see the diagram for the foundation for this tower, please click here.

The HDX-538 retails for $2,620.00

We do have several accessories that can be used with this tower:

CX-2 Coax Arms
IV-16 Inverted Vee
TRX-80 Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
MD-75 Motor Drive
MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast

The HDX-555 has a maximum height of 55' without mast and a minimum nested height of 21' 6." This tower consists of 3 sections, the top one being 15" and the bottom section is 21 5/8." The inside diameter for your rotor is 8 1/4" in the top section. This tower weighs 870 lbs. It comes standard with a hand winch, hinged base, anchor bolts (1 1/8" x 27" long) and a rotor plate (approx. down 4' inside the tower).
The average wind load ratings for the HDX-555 are as follows:

70 MPH Winds -- 29.5 sq. feet; 350 lbs.
50 MPH Winds -- 70 sq feet; 450 lbs.

To see the diagram for the foundation for this tower, please click here.

The HDX-555 retails for $4,584.00

There are several accessories that can be used with this tower:

CX-3 Coax Arms
IV-16 Inverted Vee
TRX-80 Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
MD-75 Motor Drive

MDP-750 Motor Drive, if installed at the factory (the MDP-750 requires the purchase of either the MCL-100 Limit switch Package or the RMC-1000 Remote Control)

There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast
CM-20 -- 20 ft. Cromolly Mast

The HDX-572MDPL has a maximum height of 72' without mast and a minimum nested height of 22' 8." This tower consists of 4 sections, the top one being 15" and the bottom section is 25 5/8." The inside diameter for your rotor is 8 1/4" in the top section. This tower weighs 1600 lbs. It comes standard with our MDPL-1000 motor drive (with our exclusive level wind feature), hinged base, anchor bolts (1" x 27" long) and a rotor plate (approx. down 4' inside the tower).
*Note: This tower requires the purchase of either the MCL-100 Limit Switch Control or the RMC-1000 Remote Control.
The average wind load ratings for the HDX-572MDPL are as follows:

70 MPH Winds -- 18 sq. feet; 350 lbs.
50 MPH Winds -- 55 sq feet; 750 lbs.

To see the diagram for the foundation for this tower, please click here.

The HDX-572MDPL retails for $12,005.00

These accessories can be used with the HDX-572MDPL:

CX-4 Coax Arms
IV-16 Inverted Vee
TRX-80HD Raising Fixture
MRF Mast Raising Fixture
TB-2US Thrust Bearing
There are a variety of masts that can be used:

M-5 -- 5 ft. Mast
M-10 -- 10 ft. Mast
M-15 -- 15 ft. Mast
M-20 -- 20 ft. Mast
M-15R -- 15 ft. Reinforced Mast
M-20R -- 20 ft. Reinforced Mast
CM-20 -- 20 ft. Cromolly Mast

The HDX-589MDPL has a maximum height of 89' without mast and a minimum nested height of 23' 4." This tower consists of 5 sections, the top one being 15" and the bottom section is 30 5/8." The inside diameter for your rotor is 8 1/4" in the top section. This tower weighs 2440 lbs. It comes standard with the MDPL-1000 motor drive (this one is the deluxe motor drive with our exclusive Level Wind feature), MCL-100 Limit Switch Package, hinged base, anchor bolts (1 1/8" x 27" long) and a rotor plate (approx. down 4' inside the tower).
The average wind load ratings for the HDX-589MDPL are as follows:

70 MPH Winds -- 16 sq. feet; 350 lbs.
50 MPH Winds -- 60 sq feet; 500 lbs.

To see the diagram for the foundation for this tower, please click here.

The HDX-589MDPL retails for $15,715.00